Wednesday, January 16, 2019 - 12:56PM
Design 2000
Design 2000
Design 2000
Design 2000
"Design 2000 releases the most affordable & accurate Phase Angle Meter for Ergon Energy, Integral Energy & TRUenergy"

October 9th, 2006
Design 2000 has formed an alliance with Pacific Test Equipment to develop and market several specialized test instruments for the Electricity Supply Industry.

The Phase Angle Meter is a purpose-built device that measures the Phase Angle, AC Voltage, frequency and AC Current in an electricity supply network such as at electrical sub-stations and metering installations. It is used to identify costly reactive losses in power distribution.

The User Interface consists of a keypad and 2 x 16 character LCD display. The meter’s ease of use and accuracy makes it suitable for any application where Voltage and Current levels do not exceed 500V and 10A respectively. Voltage and Current overload warnings are provided, and the Voltage and Current inputs are fully isolated from each other as well as the user.

The PAM meter is self-contained, battery powered and highly portable - designed with handheld operation in mind.

On Power up, the PAM meter samples the Voltage and Current terminals. If both waveforms are present and the Current range has been selected, the PAM meter automatically measures the TRUE RMS AC values and phase angle between them. All three values are then displayed simultaneously. If there is only a Voltage or Current waveform in normal mode, the meter will display its true RMS value and frequency, and indicate that the other waveform is missing.

If there is no valid reading for more than 10 minutes, the PAM meter turns itself off to conserve the battery. Low battery warning is also provided.

Username   Password  
Design 2000
Design 2000